
This is a quickreference list of conversion factors used by the Bioenergy Feedstock Development Programs at ORNL. It was compiled from a wide range of sources, and is designed to be concise and convenient rather than allinclusive. Most conversion factors and data are given to only 3 significant figures. Users are encouraged to consult other original sources for independent verification of these numbers. The following are links to Web sites we have found useful (many universities worldwide maintain good guides and conversion calculator pages):
Energy contents are expressed here as Lower Heating Value (LHV) unless otherwise stated (this is closest to the actual energy yield in most cases). Higher Heating Value (HHV, including condensation of combustion products) is greater by between 5% (in the case of coal) and 10% (for natural gas), depending mainly on the hydrogen content of the fuel. For most biomass feedstocks this difference appears to be 67%. The appropriateness of using LHV or HHV when comparing fuels, calculating thermal efficiencies, etc. really depends upon the application. For stationary combustion where exhaust gases are cooled before discharging (e.g. power stations), HHV is more appropriate. Where no attempt is made to extract useful work from hot exhaust gases (e.g. motor vehicles), the LHV is more suitable. In practice, many European publications report LHV, whereas North American publications use HHV.
Energy units
Quantities
 1.0 joule (J) = one Newton applied over a distance of one meter (= 1 kg m2/s2).
 1.0 joule = 0.239 calories (cal)
 1.0 calorie = 4.187 J
 1.0 gigajoule (GJ) = 109 joules = 0.948 million Btu = 239 million calories = 278 kWh
 1.0 British thermal unit (Btu) = 1055 joules (1.055 kJ)
 1.0 Quad = One quadrillion Btu (1015 Btu) = 1.055 exajoules (EJ), or approximately 172 million barrels of oil equivalent (boe)
 1000 Btu/lb = 2.33 gigajoules per ton (GJ/t)
 1000 Btu/US gallon = 0.279 megajoules per liter (MJ/l)
Power
 1.0 watt = 1.0 joule/second = 3.413 Btu/hr
 1.0 kilowatt (kW) = 3413 Btu/hr = 1.341 horsepower
 1.0 kilowatthour (kWh) = 3.6 MJ = 3413 Btu
 1.0 horsepower (hp) = 550 footpounds per second = 2545 Btu per hour = 745.7 watts = 0.746 kW
Energy Costs
 $1.00 per million Btu = $0.948/GJ
 $1.00/GJ = $1.055 per million Btu
Some common units of measure
 1.0 U.S. ton (short ton) = 2000 pounds
 1.0 imperial ton (long ton or shipping ton) = 2240 pounds
 1.0 metric ton (ton) = 1000 kilograms = 2205 pounds
 1.0 US gallon = 3.79 liter = 0.833 Imperial gallon
 1.0 imperial gallon = 4.55 liter = 1.20 US gallon
 1.0 liter = 0.264 US gallon = 0.220 imperial gallon
 1.0 US bushel = 0.0352 m3 = 0.97 UK bushel = 56 lb, 25 kg (corn or sorghum) = 60 lb, 27 kg (wheat or soybeans) = 40 lb, 18 kg (barley)
Areas and crop yields
 1.0 hectare = 10,000 m2 (an area 100 m x 100 m, or 328 x 328 ft) = 2.47 acres
 1.0 km2 = 100 hectares = 247 acres
 1.0 acre = 0.405 hectares
 1.0 US ton/acre = 2.24 t/ha
 1 metric ton/hectare = 0.446 ton/acre
 100 g/m2 = 1.0 ton/hectare = 892 lb/acre
 for example, a "target" bioenergy crop yield might be: 5.0 US tons/acre (10,000 lb/acre) = 11.2 tons/hectare (1120 g/m2)
Biomass energy
 Cord: a stack of wood comprising 128 cubic feet (3.62 m3); standard dimensions are 4 x 4 x 8 feet, including air space and bark. One cord contains approx. 1.2 U.S. tons (ovendry) = 2400 pounds = 1089 kg
 1.0 metric ton wood = 1.4 cubic meters (solid wood, not stacked)
 Energy content of wood fuel (HHV, bone dry) = 1822 GJ/t (7,6009,600 Btu/lb)
 Energy content of wood fuel (air dry, 20% moisture) = about 15 GJ/t (6,400 Btu/lb)
 Energy content of agricultural residues (range due to moisture content) = 1017 GJ/t (4,3007,300 Btu/lb)
 Metric ton charcoal = 30 GJ (= 12,800 Btu/lb) (but usually derived from 612 t airdry wood, i.e. 90180 GJ original energy content)
 Metric ton ethanol = 7.94 petroleum barrels = 1262 liters
 ethanol energy content (LHV) = 11,500 Btu/lb = 75,700 Btu/gallon = 26.7 GJ/t = 21.1 MJ/liter. HHV for ethanol = 84,000 Btu/gallon = 89 MJ/gallon = 23.4 MJ/liter
 ethanol density (average) = 0.79 g/ml ( = metric tonnes/m3)
 Metric ton biodiesel = 37.8 GJ (33.3  35.7 MJ/liter)
 biodiesel density (average) = 0.88 g/ml ( = metric tonnes/m3)
Fossil fuels
 Barrel of oil equivalent (boe) = approx. 6.1 GJ (5.8 million Btu), equivalent to 1,700 kWh. "Petroleum barrel" is a liquid measure equal to 42 U.S. gallons (35 Imperial gallons or 159 liters); about 7.2 barrels oil are equivalent to one ton of oil (metric) = 4245 GJ.
 Gasoline: US gallon = 115,000 Btu = 121 MJ = 32 MJ/liter (LHV). HHV = 125,000 Btu/gallon = 132 MJ/gallon = 35 MJ/liter
 Metric ton gasoline = 8.53 barrels = 1356 liter = 43.5 GJ/t (LHV); 47.3 GJ/t (HHV)
 gasoline density (average) = 0.73 g/ml ( = metric tonnes/m3)
 Petrodiesel = 130,500 Btu/gallon (36.4 MJ/liter or 42.8 GJ/t)
 petrodiesel density (average) = 0.84 g/ml ( = metric tonnes/m3)
 Note that the energy content (heating value) of petroleum products per unit mass is fairly constant, but their density differs significantly – hence the energy content of a liter, gallon, etc. varies between gasoline, diesel, kerosene.
 Metric ton coal = 2730 GJ (bituminous/anthracite); 1519 GJ (lignite/subbituminous) (the above ranges are equivalent to 11,50013,000 Btu/lb and 6,5008,200 Btu/lb).
 Note that the energy content (heating value) per unit mass varies greatly between different "ranks" of coal. "Typical" coal (rank not specified) usually means bituminous coal, the most common fuel for power plants (27 GJ/t).
 Natural gas: HHV = 1027 Btu/ft3 = 38.3 MJ/m3; LHV = 930 Btu/ft3 = 34.6 MJ/m3
 Therm (used for natural gas, methane) = 100,000 Btu (= 105.5 MJ)
Carbon content of fossil fuels and bioenergy feedstocks
 coal (average) = 25.4 metric tons carbon per terajoule (TJ)
 1.0 metric ton coal = 746 kg carbon
 oil (average) = 19.9 metric tons carbon / TJ
 1.0 US gallon gasoline (0.833 Imperial gallon, 3.79 liter) = 2.42 kg carbon
 1.0 US gallon diesel/fuel oil (0.833 Imperial gallon, 3.79 liter) = 2.77 kg carbon
 natural gas (methane) = 14.4 metric tons carbon / TJ
 1.0 cubic meter natural gas (methane) = 0.49 kg carbon
 carbon content of bioenergy feedstocks: approx. 50% for woody crops or wood waste; approx. 45% for graminaceous (grass) crops or agricultural residues
UnitofMeasure Equivalents
Unit 
Equivalent 
Kilowatt (kW) 
1,000 
(One Thousand) 
Watts 
Megawatt (MW) 
1,000,000 
(One Million) 
Watts 
Gigawatt (GW) 
1,000,000,000 
(One Billion) 
Watts 
Terawatt (TW) 
1,000,000,000,000 
(One Trillion) 
Watts 
Gigawatt 
1,000,000 
(One Million) 
Kilowatts 
Thousand Gigawatts 
1,000,000,000 
(One Billion) 
Kilowatts 
Kilowatthours (kWh) 
1,000 
(One Thousand) 
Watthours 
Megawatthours (MWh) 
1,000,000 
(One Million) 
Watthours 
Gigawatthours (GWh) 
1,000,000,000 
One Billion) 
Watthours 
Terawatthours (TWh) 
1,000,000,000,000 
(One Trillion) 
Watthours 
Gigawatthours 
1,000,000 
(One Million) 
Kilowatthours 
Thousand Gigawatthours 
1,000,000,000 
(One Billion) 
Kilowatthours 
U.S. Dollar 
1,000 
(One Thousand) 
Mills 
U.S. Cent 
10 
(Ten) 
Mills 
Source: Energy Information Administration, Office of Coal, Nuclear, Electric and Alternate Fuels, Electric Power Division. 
